Cleaning & Maintenance

Clean Sewage Treatment Systems

Why us?

Over 25 years experience
GNC Marine have over 25 years experience with marine cleaning and maintenance.

Over 25 years experience

GNC Marine have over 25 years experience with marine cleaning and maintenance.

Latest tecnology

We can always guarantee the latest technology within scientific research and biochemical science.

Performance through innovation

At GNC Marine you can find marine cleaning and maintenance products.

How To Effectively Degrease Membranes In Marine Sewage Treatment Systems

Degreasing Membranes in Marine Sewage Treatment Systems

Marine sewage treatment systems are critical for maintaining the cleanliness of the ocean and surrounding environment. These systems use advanced technology, including membranes, to filter and treat wastewater before it is discharged back into the sea.

However, over time, these membranes can become clogged with grease and other debris, compromising the system’s performance and potentially leading to regulatory violations.

In this blog post, we will explore how to effectively degrease membranes in marine sewage treatment systems.

Contact us today


    Degreasing Membranes in Marine Sewage Treatment Systems:

    1. Use the Right Chemicals: When selecting a degreaser, it is important to choose one that is compatible with the membrane material and will not cause damage. Chemicals that are too harsh can degrade the membrane’s performance and shorten its lifespan. Always consult the manufacturer’s recommendations for cleaning agents.
    2. Follow Proper Safety Precautions: Degreasing chemicals can be hazardous, so it is essential to follow proper safety protocols when using them. Wear protective clothing and gloves, and work in a well-ventilated area to avoid inhaling fumes. Dispose of used chemicals according to local regulations.
    3. Prepare the Membrane: Before beginning the degreasing process, the membrane should be thoroughly cleaned to remove any loose debris or buildup. This can be done with a soft-bristled brush and water. Be sure to avoid using any abrasive materials that could scratch the surface of the membrane.
    4. Apply the Degreaser: Apply the degreaser solution to the membrane using a spray bottle or other appropriate method. Allow the solution to sit for the recommended amount of time, usually around 15-20 minutes, before rinsing thoroughly with water.
    5. Monitor Performance: After degreasing, it is important to monitor the performance of the membrane to ensure that it is functioning properly. Check for any signs of clogging or reduced flow rates, and take corrective action as needed.


    Good questions
    :
    Q: How often should membranes be degreased? A: The frequency of degreasing will depend on the specific marine sewage treatment system and its usage. As a general guideline, membranes should be degreased every 3-6 months, or more frequently if recommended by the manufacturer.

    Q: Can degreasing damage the membrane? A: If the wrong type of degreaser is used or if it is applied incorrectly, it can potentially damage the membrane. Always follow the manufacturer’s recommendations and use caution when applying any cleaning solution.

    Importance to remember
    Properly degreasing membranes in marine sewage treatment systems is essential for maintaining optimal system performance and ensuring compliance with regulations. By following the steps outlined above and taking proper safety precautions, you can effectively remove grease and other debris from membranes without causing damage. Regular maintenance, including degreasing, is critical for the longevity and effectiveness of marine sewage treatment systems.

    GNC Marine can provide Microclean which is tested against the latest membrane technology, and does not effect to biological environment in the system.

    Priceless Experience

    Our staff and partners each have more than 25yrs experience in either chemical, biological, biocidal products, cleaning equipment, service provision and global logistics.

    Custom Packages

    We design, manufacture and supply specialized cleaning, maintenance and biosecurity products with proven performance to the marine and offshore industries.

    People-Oriented

    We have a history of working in partnership with the industry’s key technology providers, distributors and OEM’s. We can deliver products to you in all the key international ports

    © 2016, GNC Marine Ltd.

    Contact GNC Marine